Rogersville Ornamental Iron Fence Installation

Yes! Learn more about Ameristar Fence’s limited lifetime warranty.

All posts, panels and components used to create our ornamental iron fence and gate systems are manufactured by Ameristar Perimeter Security USA Inc. All major components used to create the fence and gate systems undergo coil processing*, roll forming*, metal processing, coating and packaging within Ameristar’s facility headquarters in Tulsa, Oklahoma, USA.

Absolutely! Our Montage Plus Pool, Pet and Play (PPP) is an ideal choice for a dog fence, pool fence or child safety fence. It was created to combat safety concerns in these applications. The primary difference in Montage Plus PPP is the 3″ airspace between pickets.

Major corrosion problems start from the inside. Protection against corrosion starts with a proven process, which is why all our ornamental iron products are treated with a superior E-Coat process that protects the product with complete coverage inside and out. The galvanized steel framework is subjected to a multi-stage pre-treatment/wash (with zinc phosphate), followed by a duplex cathodic electrocoat system consisting of an epoxy primer, which significantly increases corrosion protection, and an acrylic topcoat, which provides the protection necessary to withstand adverse weathering effects.

Typically we wait 2-3 days after the posts are set before installing the fence, this is to allow the concrete to cure to the point that it is ready to hold the fence. If the nighttime temperatures climb about 60 that time frame can decrease, if they fall below 30 degrees, then we typically give the concrete a bit longer to cure.

Our posts are set two feet, deep enough to get below the frost line found in the Springfield, Missouri area.

Our posts are set with Sakrete brand concrete. This is important for two reasons:

Sakrete costs a bit more than mixing concrete ingredients by hand, but it results in a consistent blend of portland cement, sand and gravel. By using Sakrete we are using a product that is tested for an average of 4000 psi. Some fence companies will buy ingredients individually to cut costs.

Sakrete is backed by an actual concrete company. Fencing contractors that cut costs by mixing ingredients individually have inconsistent mixes from post to post and have no recourse if the concrete mixture fails.

The property owner is required by many area city municipalities to apply for a building permit with the planning or zoning department prior to construction. The counties do not typically require a permit; however, fences must still conform to all height and set back requirements.

Based in Springfield, MO, we provide fence installation in Southwest Missouri, including Greene County, Christian County, Webster County, Polk County, Lawrence County, Stone County, and surrounding areas. You can view our complete service areas in the footer of our website.